THEMA: Digitizing H0e Liliput SteamLocL141483(video)

Hello.

There i will tell about my experience of installing:
1) Lecoder
2) Lights
3) USP PowerPack
4) Additional Pickup.
into Liliput STEAM Locomotive L141483 (H0e) 9mm

Photos:

Assembled  Locomotive :
Forward:
http://img-fotki.yandex.ru/get/5012/5475818.7/0_5e3f1_761ed394_orig
Back:
http://img-fotki.yandex.ru/get/4409/5475818.7/0_5e3ee_62f994ee_orig


Small VIDEO of mooving at small speed to demontrate current pickup and USP:
http://www.youtube.com/watch?v=JYHVp2g3LjM

SETTING UP:

1)Decoder installed upper Motor  worm using 2 screws and small plate:  
http://img-fotki.yandex.ru/get/5811/5475818.7/0_5e3ed_4d714ff2_orig
Led  resistors and USP charge circuitry  installed  besides decoder at 2 small plates glued by epoxy.


2) There is the upper  view on  whole opened loco:
http://img-fotki.yandex.ru/get/5012/5475818.7/0_5e3ef_15a15b01_orig

3) Forward lights installed at 3.3mm holes, using Kingbright 1.7mm lens LEDs
http://img-fotki.yandex.ru/get/4409/5475818.7/0_5e3f0_1052f510_orig

4) Back lights installed at small plate, screwed by 1 screw.
http://img-fotki.yandex.ru/get/5012/5475818.7/0_5e3f2_a20aa5da_orig

5) USP caps soldered to 2 small plates glued by epoxy:
Plate:
http://img-fotki.yandex.ru/get/4411/5475818.7/0_5e3f3_4dab243a_orig
Common view:
http://img-fotki.yandex.ru/get/4812/5475818.7/0_5e3ec_4a26687a_orig

6) Additional current pickup added to support axle:
http://img-fotki.yandex.ru/get/4609/5475818.7/0_5e3eb_5e566ddb_orig

This additional pickup significantly improove stability of motion of loco without USP, and reduce false command receiving with USP at dirty  track.

------------
Vadim