THEMA: Remastering of KIBRI 37809 and ArtiTec 14.115

Hello.
Recently i ve remastered models KIBRI 37809 and ArtiTec 14.115

------------

KIBRI 37809 - originally was with rough roof windows, and with not so appropriate bricks.

Original photo: http://www.gaugemaster.com/_upload/imgs/lrg/34850/KI37809.jpg

Remastering photos:

http://img-fotki.yandex.ru/get/4117/5475818.f/0_88486_582cbddd_L.jpg

http://img-fotki.yandex.ru/get/6446/5475818.f/0_88487_e47fce8f_L.jpg

http://img-fotki.yandex.ru/get/4121/5475818.f/0_88488_1825db32_L.jpg

http://img-fotki.yandex.ru/get/4128/5475818.f/0_88489_1c6bd18d_L.jpg

http://img-fotki.yandex.ru/get/4118/5475818.f/0_8848a_38f5606b_L.jpg

http://img-fotki.yandex.ru/get/4130/5475818.f/0_8848b_9ab93db7_L.jpg

http://img-fotki.yandex.ru/get/6425/5475818.f/0_8848c_875ac8b4_L.jpg

http://img-fotki.yandex.ru/get/5629/5475818.f/0_8848d_824e8f1a_L.jpg

http://img-fotki.yandex.ru/get/4136/5475818.f/0_8848e_d5516605_L.jpg

-----------

ArtiTec 14.115 - originally was  without light adoption. This model has details which cannot be glued by usual model glue on the base of ethylacetate. This is a resin! Therefore it cannot be dissolved by anywy. Moreover, all details were distorted and dont fit each other.  CyanAcrylate glue is not so professional and adhesive glue which works only in thin layer, (where details much exactly fit each other) Moreover, Cyanoacrylate glue distort windows near glueing place, making them more opaque.

Original photo :

http://www.eltallerdelmodelista.com/images/artitec-14115.jpg


There my photos of remastering:

http://img-fotki.yandex.ru/get/4134/5475818.f/0_88484_7383dbbd_L.jpg

http://img-fotki.yandex.ru/get/6701/5475818.f/0_88485_ac39dbe3_L.jpg

http://img-fotki.yandex.ru/get/5626/5475818.f/0_88483_34d7dad6_L.jpg


----------
Vadim