Anzeige:
THEMA: N-Scale Lux Swab & Vacuumer modification(avi)
THEMA: N-Scale Lux Swab & Vacuumer modification(avi)
Vadim - 15.03.14 15:53
N-Scale Lux Swab and Vacuumer runs at layout.
See Video: https://www.youtube.com/watch?v=UHpWVGRtXWk
See Picture: http://img-fotki.yandex.ru/get/9821/5475818.18/0_9ecf9_1f7a37a2_XXXL.jpg
Both LUX cars are modifyed. They have decoders for cleaning speed control, pover-packs, and extra - lights for better viewing cleaning area. This automatical cleaning train allow to clean all remote parts of layouts by automatical method.
---------
Vadim.
See Video: https://www.youtube.com/watch?v=UHpWVGRtXWk
See Picture: http://img-fotki.yandex.ru/get/9821/5475818.18/0_9ecf9_1f7a37a2_XXXL.jpg
Both LUX cars are modifyed. They have decoders for cleaning speed control, pover-packs, and extra - lights for better viewing cleaning area. This automatical cleaning train allow to clean all remote parts of layouts by automatical method.
---------
Vadim.
It' a really work miniature vacuum cleaner and felt grinder.
This is a 2 films how it works:
1) Collecting and estimating DUST:
http://youtu.be/IsB1PdUtZA4
2) Collecting Fine Ballast:
http://youtu.be/6CO204CWCo0
This is back image:
http://img-fotki.yandex.ru/get/9809/5475818.18/0_9eea1_b35ed419_XXXL.jpg
-----------
Vadim.
This is a 2 films how it works:
1) Collecting and estimating DUST:
http://youtu.be/IsB1PdUtZA4
2) Collecting Fine Ballast:
http://youtu.be/6CO204CWCo0
This is back image:
http://img-fotki.yandex.ru/get/9809/5475818.18/0_9eea1_b35ed419_XXXL.jpg
-----------
Vadim.
Hallo Vadim,
kannste da eventuell eine Umbauanleitung einstellen?
Hello Vadim,
kannste as possibly a conversion guide set?
Gruß
Andreas
kannste da eventuell eine Umbauanleitung einstellen?
Hello Vadim,
kannste as possibly a conversion guide set?
Gruß
Andreas
1) Original board has a motion magnet sensor and powerpack. So, cleaning intencity can not be controlled distantly by trottle.
Therefore:
2) I used LocoDecoder(Lenz Gold) and 1000mkf powerpack instead original board.
(Vacuumer need rectifyer (ss14 diodes) between motor and decoder in aim to remain direction of turbin turning for effective vacuuming in both sideds of motor output polarity )
Powerpack installing see instruction for decoder or , for example as in functional decoder: http://img-fotki.yandex.ru/get/6437/5475818.f/0_88c8b_aaa3e1b_XXXL.jpg
3) I use usual DIP or SMD LEDs in aim to make buffer lights and cleaning zone lights.
4) Because i have not very strong radiuses of rails at my layout, I removed central truck at original LUX Grinder car and made bugels, which directed it from side turns.
5) I add some additional Pb weight in aim to be stable at finescale C55 track.
6) I use Kato SmoothSide finescale trucks instead original ones in aim to fit Atlas C55 rails.
7) Vacuumer car need to make more bigger central turbine hole and also need to make bigger turbine output hole. It's easy to drill and re-glue yellow plastic.
More bigger input hole and air defending skirt: http://img-fotki.yandex.ru/get/9809/5475818.18/0_9eea1_b35ed419_XXXL.jpg
Ait defending skirt prevent air going between hairs of brush, improoving air flow near sleepers.
-----------
Vadim
Therefore:
2) I used LocoDecoder(Lenz Gold) and 1000mkf powerpack instead original board.
(Vacuumer need rectifyer (ss14 diodes) between motor and decoder in aim to remain direction of turbin turning for effective vacuuming in both sideds of motor output polarity )
Powerpack installing see instruction for decoder or , for example as in functional decoder: http://img-fotki.yandex.ru/get/6437/5475818.f/0_88c8b_aaa3e1b_XXXL.jpg
3) I use usual DIP or SMD LEDs in aim to make buffer lights and cleaning zone lights.
4) Because i have not very strong radiuses of rails at my layout, I removed central truck at original LUX Grinder car and made bugels, which directed it from side turns.
5) I add some additional Pb weight in aim to be stable at finescale C55 track.
6) I use Kato SmoothSide finescale trucks instead original ones in aim to fit Atlas C55 rails.
7) Vacuumer car need to make more bigger central turbine hole and also need to make bigger turbine output hole. It's easy to drill and re-glue yellow plastic.
More bigger input hole and air defending skirt: http://img-fotki.yandex.ru/get/9809/5475818.18/0_9eea1_b35ed419_XXXL.jpg
Ait defending skirt prevent air going between hairs of brush, improoving air flow near sleepers.
-----------
Vadim
Beitrag editiert am 16. 03. 2014 17:24.
Nur registrierte und eingeloggte User können Antworten schreiben.
Einloggen ->
Noch nicht registriert? Hier können Sie Ihren kostenlosen Account anlegen: Neuer N-Liste Account
Zum Seitenanfang
© by 1zu160.net;